Taking calls now — until 5:00 PM CT Open 7 days · A real person answers
(888) 826-9217

Cooktop Repair — Book a Visit Today

A cooktop fails in small ways first. One burner clicks forever without lighting. An induction zone drops power halfway through a boil. A radiant element glows on high no matter where you set the knob. Behind those symptoms sit a short list of parts: spark modules and igniters, gas valves, infinite switches, surface element coils, touch control boards, and the wiring that ties them together. Our technicians pull the cooktop, test what actually failed, and explain the finding in plain words before any work starts. Gas, electric coil, radiant glass, induction — we work on all of them, every major brand, as an independent shop. Tell us what your cooktop is doing and we will take it from there. Call us.

  • Real person answers
  • Open 7 days
  • Written quotes
Call (888) 826-9217
  • A real person answers
  • Open 7 days
  • Written quote before work starts

Taking calls until 5:00 PM CT

Cooktop Repair — residential cooktop being serviced

The cooktop symptoms we hear most

  • Burner clicks and clicks but never lights Usually a wet or cracked spark igniter, a failing spark module, or food packed into the burner ports.
  • I smell gas near the cooktop Shut off the gas, open a window, leave the house, and call the gas utility first — then a leaking valve, fitting, or orifice needs testing.
  • The element stays on high or won't shut off Almost always a welded infinite switch contact, sometimes a shorted element or control relay.
  • Touch controls ignore me or beep on their own Moisture under the glass, a cracked ribbon connection, or a failing control board reading phantom presses.
  • Induction zone cuts out mid-boil Points to overheating from a blocked cooling fan, a bad pan sensor, or an inverter board starting to fail.

Safe things to check first

Worth a look before you call — sometimes it saves you the visit.

  • 1Make sure the breaker for the cooktop is fully on — a half-tripped breaker can leave some zones dead and others working.
  • 2Pull the burner caps and grates off a gas cooktop and clear crumbs or boil-over from the tiny slots around the ring.
  • 3Wipe the glass control area dry and let it sit ten minutes; trapped moisture fakes a control failure more often than you would think.
  • 4On induction, hold a magnet to your pan bottom — if it does not stick, the cooktop is doing exactly what it should.

Cooktop Repair by city

Cooktop Repair — quick answers

Is it worth repairing a cooktop or should I replace it?

Depends on what failed. Igniters, switches, and elements are common parts and the repair is straightforward. Shattered glass or a corroded burner box on an older unit changes the math. Our technician tells you what the actual problem is so you can decide.

Can you repair a cracked glass cooktop surface?

A cracked surface is not repairable — the glass panel gets replaced as a unit, and availability depends on the model. We check whether the panel is still made before you commit to anything. Stop using cracked zones in the meantime.

Do you fix both gas and electric cooktops?

Yes. Gas, coil electric, radiant glass, and induction all come through our schedule. Each one fails differently, so tell us which type you have when you call us and mention what the burners are doing.

Why does one burner work and the others do nothing?

On gas, a single dead burner usually means that burner's igniter or valve. On electric, one dead zone points to its element or infinite switch. When a whole side dies at once, we start looking at the power feed instead.

How do I know if my cooktop or my wiring is the problem?

That is what the diagnostic visit sorts out. Our technician tests voltage at the appliance connection. If power arriving is wrong, the fix belongs to an electrician and we tell you that plainly instead of replacing parts.

What should I have ready when the technician arrives?

Clear the counter around the cooktop and know your brand and model number if you can find it — often on a label under the unit or in the paperwork. A quick description of when the trouble started helps too.

How it works

  1. Step 1

    Tell us the symptom

    Call us or fill out the form. Describe what the appliance does and does not do. Noises, error codes, smells, puddles. Brand and model help. That detail lets us plan the visit right.

  2. Step 2

    We diagnose in person

    A technician comes to your kitchen or laundry room and tests the machine instead of guessing. Controls, heating parts, motors, seals, drains. You hear what failed and what the repair involves before work starts.

  3. Step 3

    You approve the repair

    Nothing gets replaced until you say go. Common parts are handled on site when we have them. If a part must be ordered, we tell you that up front and schedule the return.

Call (888) 826-9217
  • A real person answers
  • Open 7 days
  • Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

  • 1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
  • 2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
  • 3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
  • 4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
  • 5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

  • Symptoms, not scriptsA washer that fills but never spins is a different problem than one that spins but never drains. We ask questions that narrow it down, then confirm with testing. Guesswork wastes parts and your afternoon.
  • Independent and brand-wideWe are not tied to any manufacturer. That means we work on the big laundry and kitchen names side by side, and we recommend the repair that makes sense for your machine, not one brand's playbook.
  • Regional coverageBased in Huntsville, we serve homeowners in Alabama, Georgia, Tennessee, Kentucky, Mississippi, Louisiana, Arkansas, North Carolina and South Carolina. One number to call whether you are in a city neighborhood or a small town outside it.
  • Straight explanationsYou will hear what part failed and why, in plain words. If a machine is worn past sensible repair, we say so. Homeowners make better decisions when nobody is hiding behind jargon.
  • All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
  • Straight answersIf it isn't worth repairing, we'll say so — often on the phone.

Cooktop Repair

States9
Gas & electricBoth
All major brandsYes
Open7 days

Small faults become big ones on a schedule of their own

Describe the symptoms and we'll book the visit — takes about a minute.

Call (888) 826-9217

Rather not call? Get a free quote →

Call now — a real person answers